Holography Machine
Holography Machine Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7
Narrow Web Hard Holography Embosser Mold 1
Narrow web hard Holography embosser is designed for producing 160MM width Holography products, such as Holography labels, narrow web Holography film, Holography aluminum foil,etc.
Specifications:
1. Max embossing dimension : 160*156MM/sheet
2. Embossed film thickness: 0.012MM-0.12MM
3. Max rewind & unwind rolls diameter: 500MM
4. Temperature scope: 0-180¡æ(Adjustable)
5. Embossing speed: 0M-30M/Min(Adjustable)
6. Counter scope: 0-99999 (Adjustable)
7. Shim size: <160*156*0.05 MM
8. Shim lift: 5,000M-10,000M/Shim
9. Voltage std.: 220V 50HZ
10. Power consumption: 3KW
11. Compressed air needed: 0-5Kg/cm2 (Adjustable)
12. Embosser dimension: 1300MM*750MM*120MM
13. Embosser weight: 250KG
Narrow Web Hard Holography Embosser Mold 2
Narrow web hard Holography embosser is designed for producing 160MM width Holography products, such as Holography labels foil in roll which has precise gap between two stickers. Sticker embossed by this embosser can be applied automaticly by sticker application machine. Comparing to similar mold embosser made in USA and Germany, our embosser has same quality and much lower price. This Holography embosser can emboss slim Holography seal of cigarette packaging.
Characteristics:
1.Rectify a deviation and put one automatically, rewind smoothly with little deviation..
2. Intellectual temperature control, it is accurate in temperature control when embossing.
3. Automatic control or manual control to set unwind and rewind parameter,
4. Automatic control or manual control to adjust juction of hologrma nickel shim.
5.The structure is reasonable in design, it is flexible and convenient to dismantle
Specifications:
1. Width of door: 300mm(MAX)
2. Embossing are: 152.4mm(standard)----161.0mm(customized)
3. Power : 220V or 380V, 4KW
4. Air pressure when embossing : 8kg/cm2(0.8mpa)
5.Dimension: 1850MM*900MM*1200MM
6.Weight: 700kg
|